Sump Pumps
ST1033 – ⅓ HP Submersible Sump Pump
FEATURES:
Cast iron/cast aluminum construction
Energy efficient permanent split capacitor (PSC) motor
Piggy-back dual float switch with protective cage
Continuous duty rated
Stainless steel shaft
Dual carbon/ceramic seals
18-month warranty
Water cooled – no oil
ENERGY SAVINGS:
Permanent split capacitor (PSC) motor and dual ball bearings allow for lower amp draw
ST Series will save on average of $57 per year (assumes industry average of 9.5 amps for ⅓ HP pumps and 10.5 amps for ½ HP pumps, $0.12 per kilowatt hour and running time of 5 minutes per hour)
Pump will pay for itself in just a few years
The ST1033 pumps 6.1 gallons per watt hour (G/Wh) used, which is 172% more efficient than the competitive average of ⅓ HP sump pumps.
S3033 – ⅓ HP Submersible Sump Pump
FEATURES:
Cast iron / stainless steel construction
Energy efficient permanent split capacitor (PSC) motor
Piggy-back dual float switch with cage
Deluxe controller monitors power conditions and sounds an alarm when:
AC power is out or circuit breaker is tripped
Float has been raised for more than 10 minutes indicating service is needed – 9-volt battery needs replacement
Continuous duty rated
Stainless steel shaft
Dual carbon/ceramic seals
10′ Pump cord
Output terminals for connection to a security system or auto-dialer
3-year warranty
Water cooled – no oil
ENERGY SAVINGS:
Permanent split capacitor (PSC) motor and dual ball bearings allow for lower amp draw
S3 series will save an average of $55 per year (assumes industry average of 9.5 amps for HP ⅓ pumps and 10.5 amps for ½ HP pumps, $0.12 per kilowatt hour and running time of 5 minutes per hour)
Pump will pay for itself in just a few years
The S3033 pumps 6.2 gallons per watt hour (G/Wh) used, which is 180% more efficient than the competitive average of ⅓ HP sump pumps.
The S3050 pumps 7.6 gallons per watt hour (G/Wh) used, which is 185% more efficient than the competitive average of ½ HP sump pumps.
S5033 – ⅓ HP Submersible Sump Pump
FEATURES:
Continuous duty construction
Cast iron housing
Energy efficient permanent split capacitor (PSC) motor
Stainless steel shaft
Upper and lower ball bearings
Dual carbon ceramic seals with additional third shaft seal
Dynamically balanced cast iron impeller
Stainless
ENERGY SAVINGS:
Permanent split capacitor (PSC) motor and dual ball bearings allow for lower amp draw
S5 series will save an average of $55 per year (assumes industry average of 9.5 amps for HP ⅓ pumps and 10.5 amps for ½ HP pumps, $0.12 per kilowatt hour and running time of 5 minutes per hour)
Pump will pay for itself in just a few years
The S5033 pumps 7.4 gallons per watt hour (G/Wh) used, which is 230% more efficient than the competitive average of ⅓ HP sump pumps.
The S5050 pumps 6.1 gallons per watt hour (G/Wh) used, which is 130% more efficient than the competitive average of ½ HP sump pumps.
PHCC Pro Series PS-C33 Combination Sump Pump System
FEATURES:
Pre-Assembled for quick and easy installation
Energy efficient permanent split capacitor (PSC) motor
Continuous duty rated
Dual float switches on primary and backup pumps
Automatically switches to battery power when AC fails
Backup pump will assist primary pump if excessive amounts of water are entering the sump
Detects irregularities, sounds an alarm, and pinpoints problems and solutions on control panel
Maintains and recharges battery automatically
Alarm can be silenced during a power outage
Output terminals for connection to a security system or auto-dialer (PS-C33 only)
Can accommodate two (2) B2200 batteries for 16 hours of continuous pumping (PS-C33 only)
3-year warranty
Water cooled (no oil to leak)
ENERGY SAVINGS:
PS-C33 saves on average $55 per year
(assumes industry average of 9.5 amps for ⅓ HP pumps and 10.5 amps for ½ HP pumps, $0.12 per kilowatt hour and running time of 5 minutes per hour)
PHCC Pro Series 2400 Battery Backup Sump Pump System
FEATURES:
Automatically switches to battery power when AC fails
Recharges automatically
Monitors system conditions and alarms when:
Battery needs water, is discharged or needs to be replaced
Battery cable is loose or corroded
Power plug is disconnected, fuse is blown or circuit breaker is tripped
Pump is clogged or broken
Backup pump has been activated
Alarm can be silenced during a power outage
Displays percentage of power remaining in the battery
Runs pump weekly to test for proper operation
Can run directly on AC power
Output terminals for connection to a security system or auto-dialer – Let the system call you
Accommodates up to two (2) B2200 batteries for 16 hours of continuous pumping
PHCC Pro Series Water Alarm
Water damage is costly and frequently leads to other problems… Just as the smoke alarm helps detect smoke, a water alarm can help detect water.
The PHCC Pro Series Water Alarm detects water leaks before they cause costly property damage or let mold grow. Simple water leaks from water heaters, sink drains, broken washing machine hoses (the number one cause of water damage in homes), clogged air conditioner drain tubes and leaky or broken pipes are immediately detected, resulting in quick corrective measures dramatically lowering damage, clean-up time and money.
Place a water alarm wherever there is a risk of water damage – utility room, laundry room, kitchen, bathroom or basement. The water alarm will sound when as little as 1/32″ of water reaches the sensor. Includes 6´ of sensor wire for remote monitoring. Wire can be extended to over 100´.
Dependable Protection
Solid state circuitry is extremely sensitive and reliable
110dB alarm can be heard throughout the house
Extended Life
Alarm will sound up to three days
9V Battery will last 24-48 months
Accidents happen…
Water heaters wear out and leak
Pipes break
Deluxe Dual Float Controller (DFC2)
There are two types of controllers that use the Dual Float Switch:
Deluxe Dual Float Controller (Model #DFC2) The Deluxe Controller monitors pump and power conditions, and sounds an alarm when a problem is detected. The warning signals are described below. In addition, it begins the pumping cycle when either float rises ¼”, and runs the pump an additional 10 seconds after the float returns to its original position. This controller (model #DFC2) is included with all S3 Series and S5 Series pumps.
Deluxe Controller Warning Signals:
When a warning alarm sounds, a light will appear on the front panel of the controller indicating which problem has been detected:
AC power is out – sounds an alarm when the power is out, the pump has accidentally been unplugged, or the circuit breaker has been tripped
The system is operating -a light blinks continuously indicating that the controller is plugged in and operating
9-volt battery low or slide switch is OFF – indicates when it’s time to replace the battery or reminds you to move the slide switch back to the ON position
Pump or float problem – sounds an alarm when the float has been raised for 10 minutes continuously, an indication that there is a potential pump or plumbing problem
Remote terminal – provides connection to a home security system or remote dialer.
PHCC Pro Series Ejector Series Pumps
FEATURES:
Handles 2″ solids through a 2″ discharge
Energy efficient permanent split capacitor (PSC) motor
Rated for continuous duty use
Dual carbon/ceramic seals plus one Buna N seal
Upper and lower sealed ball bearings
Stainless steel shaft and fasteners
Cast iron impeller
3-year warranty
PHCC Pro Series CONNECT WiFi Module
FEATURES:
Sends emails or text notifications and status alerts to your phone, tablet or computer
NO MONTHLY FEE
Connect using home Wi-Fi
Simple setup
PHCC Pro Series CONNECT mobile app allows you to see your backup pump status and receive updates
COMPATIBLE SYSTEMS:
Pro Series PS-C33
ST1033 w/ DFC2
S3033 w/ DFC2